zte blade v2

M just M to be M2 ad M5. At first it was just a 2. Could I just get the nanostation and use a switch just for wired internet and then add a wrieless AP to the switch if I had wished to do so? What we are doing here is making for a very simple, small, unit. Zte axon 7 cheap But if you use a wireless router, you would not have the need then to have to add an access point. Really nice and well documented. Thanks for this :) I happens to have the airgateway installer version which have USB power input and I would have thought I just could use this connected to my caravan battery. Do you know if it somehow can be used, perhaps update with other firmware?

Thomas…I am so sorry, but I am really not sure what you are asking.

Last update zte blade v2

I know of no other AirGateway. Totally forgot about that. Your writeup is very informative and helpful; since it was written several years ago, any changes to recommend like newer or updated equipment like the NSM2 for increased range? Hi…As it is mentioned right at the beginning, it is all still current.

Just watched your video on firmware update. I have two issues.

Information: zte blade v2

Second issue when I am on the system tab and click check now for system updates popup box in lower right gives me options to go to download page or dismiss but not to update. I have the NanoStation M2 (No Loco) and am connected to an AP. An other issue i have been having is while browsing the internet from my laptop connected to airgateway I repeatedly lose connection and have to reconnect laptop to airgateway.

Any help greatly appreciatedHi…You should be able to see XM or XW somewhere.

How to update zte blade v2

But that is the NanoStation and has nothing to do with the AirGateway. Thanks, found the XM designation on the system tab with firmware version.

It did not show on Main Tab. Firmware update on Nanostation now completed with your help. Since update XM does show on Main Tab. Do you feel that may help my repeated lost connection to Laptop? But the connection issue is NOT because of the NanoStation as the connection is between your device and the AirGateway.

Last update zte blade v2

So updating that will surely not hurt. Just an update in case it may help someone else. Update of firmware on AirGateway did not solve the recuring dropped connection to laptop but then I decieded to reset the Air Gateway by using the reset button behind the hole in the device itself and then went thru the procedure for setting up the AirGate in your origional video. Now 2 days and counting with no dropped connection. Previously dropped multiple times per day. I am declaring it fixed!! Sorry you are having issues.

Sorry to say hard to help as that message does not help any. I have no clue if you are just setting it up and how far you got etc. I know if you follow the tutorial, it surely goes without a hitch. My question is will this set up work for my Ford F150 build out? I need better connection at the campgrounds but also need a long range boost for when I have to stay else where…campground not open in the winter. EktarSorry, hard to say as I have no idea what you will be trying to connect to and the distance.

Operations manager zte blade v2

This is only for Wi-Fi not cell-phones just to be clear. Looking forward to meeting you both on the road somewhere. We call it our 2 4 6 8 trip. Might not have time to order the stuff now because our mail will be forward soon but when we get to South Dakota, we will be there for a month. Will def get it hooked up then. Will be wintering again in the southwest.

Hey…Seeing you will be out west, and you want to meet us, why not make plans to come to our OOBerfest in January! We will be there. This will be a first for us, never boondocked before (other than Walmart).

Operations manager zte blade v2

Got 2 big dogs so we might have to be out on the edge somewhere. I am looking in to this system for my RV and was wondering if this could also be used on my home wifi system to extend my wifi coverage to areas of the house and back yard that have poor coverage with my comcast router.

Just connect the NanoStation to your SSID of your Home Router. NOTE…You will need to make the SSID of the AirGateway something else other than your home network name. If you are thinking of doing this just for your home, there are better ways to do it than this. But seeing you mentioned RV, then yes…you surely can use it at home also. But you will just connect to the SSID of your extended network.

Startup zte blade v2

But in theory, it Should work as long as you lock on to the MAC address of your home router vs the AirGateway. Most home systems are 192. X and this could, maybe run into an IP conflict.

I would like to thank you for your help. I ordered the parts and set per your video. The set up was easy and it has been working great extending my home wifi signal. I am excited to see how well it works in the rv next month. Then, one day, I saw the update buttons.

I went through the whole routine and then I absolutely could not connect to the nanostation anymore. I then pushed its reset button.

Then I read various search results that I may have nuked something with that reset, tried to ping it or to download some help with tftp (sp? Could not get to the login page of the radio. On the back of the radio I have the power light solid green and the LAN light green blinking. Any advice at all on how to proceed?

Damn, it was working so fine until I tried that upgrade on my own! I still have the airmax connected by ethernet to the imac. Sounds like you may have already connected the AirGateway before you should have. Doing so would block you from reaching the NanoStation. About 2 weeks ago the M2 stopped getting a signal.

Only the first 2 green lights are lit. Hi…Sorry to read of your issue. The first light is POWER, the second is the LAN connection which flashes when there is communication happening across the wire. If that access point you were connected to is now off-line, well so would like to be. Now in regards to connecting to the NanoStation directly and can not reach 192. Are you plugging the LAN port of the POE injector into your computer Ethernet? You did not mention if you are using an AirGateway or something else so not sure if a wi-fi router is involved.

But the good news is this…you CAN factory reset it and then just set it up quickly again, after all, you have already done it. To reset it, with a powered on fully, using a paperclip press in on a little button inside the reset hole and hold a little button down for 20 seconds. This will reset the unit back to factory defaults and takes about 2 mins so DO NOT power it off for at least 3 mins. GOOD LUCK and glad to read it was working great for you. That could be what happen here but is rare. Thanks for the great video! My husband and I are on the verge of ordering the NSM2 and Gateway LR for our travel trailer.

One question though, once the initial configuration and set up is complete for both M2 and Gateway on the computer, can you access the Ubiquiti set up screen to change the AP from any device, such as a tablet or cell phone? Hi…Yes, at that point, any Wi-Fi connected device to the AirGateway can get you to the NanoStation to make changes. They now even have an APP that can be used. Just please be aware however, you are dealing with commercial gear, which is fine and great, but it is usually something that is setup and not touched like we all are using them. As such, if not using the app and using a browser, I would at least use a tablet as thing will be small on the screen.

As far as the app, I really should take a look at it as I never really have, but I have read that others do it that way. On with what you are here for… What can we say, we all would like a much better connection to an RV Parks Wi-Fi. Ubiquiti NanoStation Loco M2 Ubiquiti AirGateway Now as a reminder, even though you will have a much better chance connecting to the RV parks Wi-Fi service, that does not mean you will have better Internet. In under 30 seconds, you should see the antenna lights light up and then you should have access to the Internet.

Every Wi-Fi connected device has it own unique MAC addr